View F861AK823M310C_8320230.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 001_f861_x2_310 ? 5/13/2015 1 benefts ? a pprovals: enec, ul, cul, cqc ? r ated voltage: 310 vac 50/60 hz ? ca pacitance range: 0.01 C 4.7 f ? l ead spacing: 7.5 C 37.5 mm ? ca pacitance tolerance: 20%, 10% ? c limatic category: 40/110/56, iec 60068C1 ? t ape and reel in accordance with iec 60286C2 ? r ohs compliant and lead-free terminations ? operating temperature range of -40?c to +110?c ? 1 00% screening factory test at 1,900 vdc overview the f861 series is constructed of metallized polypropylene flm e ncapsulated with self-extinguishing resin in a box of material meeting the requirements of ul 94 vC0. applications for use as electromagnetic interference (emi) noise suppression in across-the-line applications requiring x2 safety classifcation a ccording to iec 60384-14. not for use in "series with mains" and as ac power fltering type applications. ac line emi suppression and rc networks f861 series metallized polypropylene film, class x2, 310 vac part number system f 861 b c 104 m 310 c capacitor class series lead spacing (mm) size code capacitance code (pf) capacitance tolerance voltage (vac) packaging f = film x2, metallized polypropylene k = 7.5 a = 10 b = 15 d = 22.5 f = 27.5 r = 37.5 see dimension table first two digits represent signifcant f gures. third d igit specifes n umber of zeros. k = 10% m = 20% 310 see ordering options table ordering options table lead spacing nominal (mm) type of leads and packaging lead length (mm) lead and packaging code 7.5 standard lead and packaging options bulk (bag) C short leads 4 +2/-0 c bulk (bag) C long leads 17 +0/-1 a tape & reel (standard reel) h 0 = 18.5 +/-0.5 l 2wkhu/hdgdqg3dfndjlqj2swlrqv bulk (bag) C max length leads 20 +5/-0 all0l ammo pack h 0 = 18.5 +/-0.5 r one world. one kemet
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 001_f861_x2_310 ? 5/13/2015 2 ordering options table cont'd lead spacing nominal (mm) type of leads and packaging lead length (mm) lead and packaging code 10 standard lead and packaging options bulk (bag) C short leads 4 +2/-0 c bulk (bag) C long leads 17 +0/-1 a tape & reel (standard reel) h 0 = 18.5 +/-0.5 l 2wkhu/hdgdqg3dfndjlqj2swlrqv bulk (bag) C max length leads 20 +5/-0 all0l ammo pack h 0 = 18.5 +/-0.5 r tape & reel (large reel) h 0 = 18.5 +/-0.5 p 15 standard lead and packaging options bulk (bag) C short leads 4 +2/-0 c bulk (bag) C long leads 17 +0/-1 a tape & reel (standard reel) h 0 = 18.5 +/-0.5 l pizza pack 4 +2/-0 z 2wkhu/hdgdqg3dfndjlqj2swlrqv bulk (bag) C max length leads 25 +5/-0 alr0l ammo pack h 0 = 18.5 +/-0.5 r tape & reel (large reel) h 0 = 18.5 +/-0.5 p 6wdqgdug/hdgdqg3dfndjlqj2swlrqv pizza C long leads 17 +0/-1 zlh0j pizza pack 4 +2/-0 z 2wkhu/hdgdqg3dfndjlqj2swlrqv tape & reel (standard reel) h 0 = 18.5 +/-0.5 l tape & reel (large reel) h 0 = 18.5 +/-0.5 p ammo pack h 0 = 18.5 +/-0.5 r 6wdqgdug/hdgdqg3dfndjlqj2swlrqv pizza C long leads 17 +0/-1 zlh0j pizza pack 4 +2/-0 z 6wdqgdug/hdgdqg3dfndjlqj2swlrqv pizza C long leads 17 +0/-1 zlh0j pizza pack 4 +2/-0 z film capacitors ac line emi suppression and rc networks C f861 series metallized polypropylene film, class x2, 310 vac
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 001_f861_x2_310 ? 5/13/2015 3 dimensions C millimeters l b b h d p ll 0.5 0.5 p 1 2-pin 4-pin front view side view p p 1 p 2-pin 4-pin schematic size code version 1 b h l d nominal tolerance nominal tolerance nominal tolerance nominal tolerance nominal tolerance nominal tolerance kg 7.5 +/-0.4 +/-0.05 +/-0.4 +/-0.05 +/-0.4 +/-0.05 +/-0.4 +/-0.05 +/-0.4 +/-0.05 +/-0.4 +/-0.05 +/-0.4 +/-0.05 +/-0.4 +/-0.05 low profle +/-0.4 +/-0.05 +/-0.4 +/-0.05 +/-0.4 +/-0.05 +/-0.4 +/-0.05 +/-0.4 +/-0.05 +/-0.4 +/-0.05 high profle +/-0.4 +/-0.05 +/-0.4 +/-0.05 high profle +/-0.4 +/-0.05 +/-0.4 +/-0.05 +/-0.4 +/-0.05 +/-0.4 +/-0.05 +/-0.4 +/-0.05 +/-0.4 +/-0.05 low profle +/-0.4 +/-0.05 +/-0.4 +/-0.05 +/-0.4 +/-0.05 +/-0.4 +/-0.05 +/-0.4 +/-0.05 +/-0.4 +/-0.05 +/-0.4 +/-0.05 +/-0.4 +/-0.05 note: see ordering options table for lead length (ll) options. film capacitors ac line emi suppression and rc networks C f861 series metallized polypropylene film, class x2, 310 vac
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 001_f861_x2_310 ? 5/13/2015 4 dimensions C millimeters cont'd l b b h d p ll 0.5 0.5 p 1 2-pin 4-pin front view side view p p 1 p 2-pin 4-pin schematic size code version 1 b h l d nominal tolerance nominal tolerance nominal tolerance nominal tolerance nominal tolerance nominal tolerance du 22.5 +/-0.4 +/-0.05 +/-0.4 +/-0.05 +/-0.4 +/-0.05 +/-0.4 +/-0.05 +/-0.4 +/-0.05 +/-0.4 +/-0.05 high profle +/-0.4 +/-0.05 +/-0.4 +/-0.05 +/-0.4 +/-0.05 +/-0.4 +/-0.05 low profle +/-0.4 +/-0.05 low profle +/-0.4 +/-0.05 low profle +/-0.4 +/-0.05 +/-0.4 +/-0.05 +/-0.4 +/-0.05 +/-0.4 +/-0.05 +/-0.4 +/-0.05 +/-0.4 +/-0.05 +/-0.4 +/-0.05 +/-0.4 +/-0.05 +/-0.4 +/-0.05 low profle +/-0.4 +/-0.05 low profle +/-0.4 +/-0.05 note: see ordering options table for lead length (ll) options. film capacitors ac line emi suppression and rc networks C f861 series metallized polypropylene film, class x2, 310 vac
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 001_f861_x2_310 ? 5/13/2015 5 performance characteristics rated voltage 310 vac 50/60 hz capacitance range 0.01 C 4.7 f capacitance tolerance 20%, 10% temperature range -40oc to +110c climatic category 40/110/56 approvals enec, ul, cul, cqc dissipation factor maximum values at +23c c 0.1 f c > 0.1 f 1 khz 0.3% 0.2% test voltage between terminals the 100% screening factory test is carried out at 1,900 vdc. the voltage level is selected to meet the requirements in applicable equipment standards. all electrical characteristics are checked after the test. it is not permitted to repeat this test as there is a risk to damage the capacitor. kemet is not liable in such case for any failures. insulation resistance minimum values between terminals c 0.33 f 30,000 m? c > 0.33 f 10,000 m? ? f in dc applications recommended voltage 630 vdc impedance graph film capacitors ac line emi suppression and rc networks C f861 series metallized polypropylene film, class x2, 310 vac
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 001_f861_x2_310 ? 5/13/2015 6 environmental test data test iec publication procedure endurance iec 60384C14 1.25 x v r vac 50 hz, once every hour increase to 1,000 vac for 0.1 second, 1,000 hours at upper rated temperature vibration iec 60068C2C6 test fc 3 directions at 2 hours each 10 C 55 hz at 0.75 mm or 98 m/s 2 bump iec 60068C2C29 test eb 1,000 bumps at 390 m/s 2 change of temperature iec 60068C2C14 test na upper and lower rated temperature 5 cycles active flammability iec 60384C14 v r + 20 surge pulses at 2.5 kv (pulse every 5 seconds) p assive flammability iec 60384C14 iec 60384C1, iec 60695C11C5 needle-fame test damp heat steady state iec 60068C2C78 test cab +40c and 93% rh, 56 days approvals mark specifcation file number en/iec 60384C14 ca08.00189 ul 60384C14 and can/csaC e60384C14 e97797 iec 60384C14 cqc12001084206 cqc12001084386 cqc12001084205 cqc12001084204 cqc12001084195 cqc12001084207 environmental compliance all new kemet emi capacitors are rohs compliant and halogen free. film capacitors ac line emi suppression and rc networks C f861 series metallized polypropylene film, class x2, 310 vac
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 001_f861_x2_310 ? 5/13/2015 7 table 1 C ratings & part number reference (1) m = 20%, k = 10%. (2) insert lead and packaging code. see ordering options table for available options. (3) m = 20% (only available tolerance). capacitance value (f) size code maximum dimensions in mm lead spacing (p) dv/dt (v/s) part number 0.01 kg 4.0 8.0 10.0 7.5 500 f861kg103(1)310(2) 0.012 kg 4.0 8.0 10.0 7.5 500 f861kg123(1)310(2) 0.015 kh 4.0 9.0 10.0 7.5 500 f861kh153(3)310(2) 0.018 kj 5.0 10.5 10.0 7.5 500 f861kj183(1)310(2) 0.022 kj 5.0 10.5 10.0 7.5 500 f861kj223(1)310(2) 0.025 kj 5.0 10.5 10.0 7.5 500 f861kj253(1)310(2) 0.027 kj 5.0 10.5 10.0 7.5 500 f861kj273(1)310(2) 0.033 kj 5.0 10.5 10.0 7.5 500 f861kj333(3)310(2) 0.033 km 6.0 12.0 10.5 7.5 500 f861km333(1)310(2) 0.039 km 6.0 12.0 10.5 7.5 500 f861km393(1)310(2) 0.047 km 6.0 12.0 10.5 7.5 500 f861km473(3)310(2) 0.01 ae 4.0 8.0 13.0 10.0 500 f861ae103(1)310(2) 0.01 al 9.5 7.5 13.0 10.0 500 f861al103(1)310(2) 0.012 ae 4.0 8.0 13.0 10.0 500 f861ae123(1)310(2) 0.015 ae 4.0 8.0 13.0 10.0 500 f861ae153(1)310(2) 0.015 al 9.5 7.5 13.0 10.0 500 f861al153(1)310(2) 0.018 ae 4.0 8.0 13.0 10.0 500 f861ae183(1)310(2) 0.018 al 9.5 7.5 13.0 10.0 500 f861al183(1)310(2) 0.022 ae 4.0 8.0 13.0 10.0 500 f861ae223(1)310(2) 0.022 al 9.5 7.5 13.0 10.0 500 f861al223(1)310(2) 0.025 ae 4.0 8.0 13.0 10.0 500 f861ae253(1)310(2) 0.025 al 9.5 7.5 13.0 10.0 500 f861al253(1)310(2) 0.027 ae 4.0 8.0 13.0 10.0 500 f861ae273(1)310(2) 0.027 al 9.5 7.5 13.0 10.0 500 f861al273(1)310(2) 0.033 ae 4.0 8.0 13.0 10.0 500 f861ae333(1)310(2) 0.033 al 9.5 7.5 13.0 10.0 500 f861al333(1)310(2) 0.039 ae 4.0 8.0 13.0 10.0 500 f861ae393(1)310(2) 0.039 al 9.5 7.5 13.0 10.0 500 f861al393(1)310(2) 0.047 ae 4.0 8.0 13.0 10.0 500 f861ae473(3)310(2) 0.047 al 9.5 7.5 13.0 10.0 500 f861al473(1)310(2) 0.056 ag 4.0 9.0 13.0 10.0 500 f861ag563(1)310(2) 0.056 al 9.5 7.5 13.0 10.0 500 f861al563(1)310(2) 0.068 ak 5.0 11.0 13.0 10.0 500 f861ak683(1)310(2) 0.068 al 9.5 7.5 13.0 10.0 500 f861al683(1)310(2) 0.082 ak 5.0 11.0 13.0 10.0 500 f861ak823(1)310(2) 0.082 al 9.5 7.5 13.0 10.0 500 f861al823(1)310(2) 0.1 ak 5.0 11.0 13.0 10.0 500 f861ak104(3)310(2) 0.1 al 9.5 7.5 13.0 10.0 500 f861al104(1)310(2) 0.1 ap 6.0 12.0 13.0 10.0 500 f861ap104(1)310(2) 0.12 al 9.5 7.5 13.0 10.0 500 f861al124(1)310(2) 0.12 ap 6.0 12.0 13.0 10.0 500 f861ap124(1)310(2) 0.15 ao 7.0 17.0 13.0 10.0 500 f861ao154(1)310(2) 0.15 ap 6.0 12.0 13.0 10.0 500 f861ap154(3)310(2) 0.18 ao 7.0 17.0 13.0 10.0 500 f861ao184(1)310(2) 0.22 ao 7.0 17.0 13.0 10.0 500 f861ao224(1)310(2) 0.25 ao 7.0 17.0 13.0 10.0 500 f861ao254(1)310(2) 0.27 ao 7.0 17.0 13.0 10.0 500 f861ao274(1)310(2) 0.01 bb 4.0 10.0 18.0 15.0 400 f861bb103(1)310(2) 0.012 bb 4.0 10.0 18 .0 15.0 400 f861bb123(1)310(2) 0.015 bb 4.0 10.0 18.0 15.0 400 f861bb153(1)310(2) 0.018 bb 4.0 10.0 18.0 15.0 400 f861bb183(1)310(2) 0.022 bb 4.0 10.0 18.0 15.0 400 f861bb223(1)310(2) 0.025 bb 4.0 10.0 18.0 15.0 400 f861bb253(1)310(2) 0.027 bb 4.0 10.0 18.0 15.0 400 f861bb273(1)310(2) 0.033 bb 4.0 10.0 18.0 15.0 400 f861bb333(1)310(2) 0.039 bb 4.0 10.0 18.0 15.0 400 f861bb393(1)310(2) 0.047 bb 4.0 10.0 18.0 15.0 400 f861bb473(1)310(2) 0.056 bb 4.0 10.0 18.0 15.0 400 f861bb563(1)310(2) 0.068 bb 4.0 10.0 18.0 15.0 400 f861bb683(1)310(2) capacitance value (f) size code b (mm) h (mm) l (mm) lead spacing (p) dv/dt (v/s) part number film capacitors ac line emi suppression and rc networks C f861 series metallized polypropylene film, class x2, 310 vac
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 001_f861_x2_310 ? 5/13/2015 8 capacitance value (f) size code maximum dimensions in mm lead spacing (p) dv/dt (v/s) part number b h l 0.082 bb 4.0 10.0 18.0 15.0 400 f861bb823(1)310(2) 0.1 bb 4.0 10.0 18.0 15.0 400 f861bb104(1)310(2) 0.12 bb 4.0 10.0 18.0 15.0 400 f861bb124(3)310(2) 0.12 bc 5.0 11.0 18.0 15.0 400 f861bc124(1)310(2) 0.15 bc 5.0 11.0 18.0 15.0 400 f861bc154(1)310(2) 0.15 bt 9.0 12.5 18.0 15.0 400 f861bt154(1)310(2) 0.18 bc 5.0 11.0 18.0 15.0 400 f861bc184(3)310(2) 0.18 be 5.5 12.5 18.0 15.0 400 f861be184(1)310(2) 0.18 bt 9.0 12.5 18.0 15.0 400 f861bt184(1)310(2) 0.22 be 5.5 12.5 18.0 15.0 400 f861be224(1)310(2) 0.22 bg 6.0 12.0 18.0 15.0 400 f861bg224(1)310(2) 0.22 bt 9.0 12.5 18.0 15.0 400 f861bt224(1)310(2) 0.25 bg 6.0 12.0 18.0 15.0 400 f861bg254(1)310(2) 0.25 bt 9.0 12.5 18.0 15.0 400 f861bt254(1)310(2) 0.27 bg 6.0 12.0 18.0 15.0 400 f861bg274(3)310(2) 0.27 bi 6.0 17.5 18.0 15.0 400 f861bi274(1)310(2) 0.27 bk 7.5 13.5 18.0 15.0 400 f861bk274(1)310(2) 0.27 br 13.0 12.0 18.0 15.0 400 f861br274(1)310(2) 0.27 bt 9.0 12.5 18.0 15.0 400 f861bt274(1)310(2) 0.33 bi 6.0 17.5 18.0 15.0 400 f861bi334(1)310(2) 0.33 bk 7.5 13.5 18.0 15.0 400 f861bk334(1)310(2) 0.33 br 13.0 12.0 18.0 15.0 400 f861br334(1)310(2) 0.33 bt 9.0 12.5 18.0 15.0 400 f861bt334(1)310(2) 0.39 bi 6.0 17.5 18.0 15.0 400 f861bi394(1)310(2) 0.39 bk 7.5 13.5 18.0 15.0 400 f861bk394(3)310(2) 0.39 bp 8.5 14.5 18.0 15.0 400 f861bp394(1)310(2) 0.39 br 13.0 12.0 18.0 15.0 400 f861br394(1)310(2) 0.39 bt 9.0 12.5 18.0 15.0 400 f861bt394(1)310(2) 0.47 bo 7.5 18.5 18.0 15.0 400 f861bo474(1)310(2) 0.47 bp 8.5 14.5 18.0 15.0 400 f861bp474(1)310(2) 0.47 br 13.0 12.0 18.0 15.0 400 f861br474(1)310(2) 0.56 bo 7.5 18.5 18.0 15.0 400 f861bo564(1)310(2) 0.56 br 13.0 12.0 18.0 15.0 400 f861br564(1)310(2) 0.56 bs 10.0 16.0 18.0 15.0 400 f861bs564(1)310(2) 0.68 br 13.0 12.0 18.0 15.0 400 f861br684(3)310(2) 0.68 bs 10.0 16.0 18.0 15.0 400 f861bs684(1)310(2) 0.82 by 11.0 19.0 18.0 15.0 400 f861by824(1)310(2) 1 bz 12.0 20.0 18.0 15.0 400 f861bz105(3)310(2) 0.039 db 6.0 14.5 26.0 22.5 200 f861db393(1)310(2) 0.047 db 6.0 14.5 26.0 22.5 200 f861db473(1)310(2) 0.056 db 6.0 14.5 26.0 22.5 200 f861db563(1)310(2) 0.068 db 6.0 14.5 26.0 22.5 200 f861db683(1)310(2) 0.082 db 6.0 14.5 26.0 22.5 200 f861db823(1)310(2) 0.1 db 6.0 14.5 26.0 22.5 200 f861db104(1)310(2) 0.12 db 6.0 14.5 26.0 22.5 200 f861db124(1)310(2) 0.15 db 6.0 14.5 26.0 22.5 200 f861db154(1)310(2) 0.18 db 6.0 14.5 26.0 22.5 200 f861db184(1)310(2) 0.22 db 6.0 14.5 26.0 22.5 200 f861db224(1)310(2) 0.25 db 6.0 14.5 2 6.0 22.5 200 f861db254(1)310(2) 0.27 db 6.0 14.5 26.0 22.5 200 f861db274(1)310(2) 0.33 db 6.0 14.5 26.0 22.5 200 f861db334(1)310(2) 0.39 db 6.0 14.5 26.0 22.5 200 f861db394(1)310(2) 0.47 db 6.0 14.5 26.0 22.5 200 f861db474(3)310(2) 0.47 di 7.0 16.0 26.0 22.5 200 f861di474(1)310(2) 0.56 di 7.0 16.0 26.0 22.5 200 f861di564(1)310(2) 0.68 di 7.0 16.0 26.0 22.5 200 f861di684(1)310(2) 0.82 dh 8.0 16.0 26.0 22.5 200 f861dh824(1)310(2) 1 dj 8.5 17.0 26.0 22.5 200 f861dj105(3)310(2) 1.2 dm 9.0 18.5 26.0 22.5 200 f861dm125(3)310(2) capacitance value (f) size code b (mm) h (mm) l (mm) lead spacing (p) dv/dt (v/s) part number table 1 C ratings & part number reference cont'd film capacitors ac line emi suppression and rc networks C f861 series metallized polypropylene film, class x2, 310 vac
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 001_f861_x2_310 ? 5/13/2015 9 capacitance value (f) size code maximum dimensions in mm lead spacing (p) dv/dt (v/s) part number b h l 1.2 do 10.0 18.5 26.0 22.5 200 f861do125(1)310(2) 1.5 dp 11.0 20.0 26.0 22.5 200 f861dp155(1)310(2) 1.8 dp 11.0 20.0 26.0 22.5 200 f861dp185(3)310(2) 1.8 du 13.0 22.0 26.0 22.5 200 f861du185(1)310(2) 2.2 du 13.0 22.0 26.0 22.5 200 f861du225(1)310(2) 2.5 du 13.0 22.0 26.0 22.5 200 f861du255(3)310(2) 2.5 dy 15.5 24.5 26.0 22.5 200 f861dy255(1)310(2) 2.7 dy 15.5 24.5 26.0 22.5 200 f861dy275(1)310(2) 3.3 dy 15.5 24.5 26.0 22.5 200 f861dy335(3)310(2) 0.15 fb 9.0 17.0 31.5 27.5 150 f861fb154(1)310(2) 0.18 fb 9.0 17.0 31.5 27.5 150 f861fb184(1)310(2) 0.22 fb 9.0 17.0 31.5 27.5 150 f861fb224(1)310(2) 0.25 fb 9.0 17.0 31.5 27.5 150 f861fb254(1)310(2) 0.25 fh 21.0 12.5 31.5 27.5 150 f861fh254(1)310(2) 0.27 fb 9.0 17.0 31.5 27.5 150 f861fb274(1)310(2) 0.27 fh 21.0 12.5 31.5 27.5 150 f861fh274(1)310(2) 0.33 fb 9.0 17.0 31.5 27.5 150 f861fb334(1)310(2) 0.33 fh 21.0 12.5 31.5 27.5 150 f861fh334(1)310(2) 0.39 fb 9.0 17.0 31.5 27.5 150 f861fb394(1)310(2) 0.39 fh 21.0 12.5 31.5 27.5 150 f861fh394(1)310(2) 0.47 fb 9.0 17.0 31.5 27.5 150 f861fb474(1)310(2) 0.47 fh 21.0 12.5 31.5 27.5 150 f861fh474(1)310(2) 0.56 fb 9.0 17.0 31.5 27.5 150 f861fb564(1)310(2) 0.56 fh 21.0 12.5 31.5 27.5 150 f861fh564(1)310(2) 0.68 fb 9.0 17.0 31.5 27.5 150 f861fb684(1)310(2) 0.68 fh 21.0 12.5 31.5 27.5 150 f861fh684(1)310(2) 0.82 fb 9.0 17.0 31.5 27.5 150 f861fb824(1)310(2) 0.82 fh 21.0 12.5 31.5 27.5 150 f861fh824(1)310(2) 1 fb 9.0 17.0 31.5 27.5 150 f861fb105(1)310(2) 1 fh 21.0 12.5 31.5 27.5 150 f861fh105(1)310(2) 1.2 fb 9.0 17.0 31.5 27.5 150 f861fb125(3)310(2) 1.2 fc 11.0 20.0 31.5 27.5 150 f861fc125(1)310(2) 1.2 fh 21.0 12.5 31.5 27.5 150 f861fh125(1)310(2) 1.5 fc 11.0 20.0 31.5 27.5 150 f861fc155(1)310(2) 1.5 fh 21.0 12.5 31.5 27.5 150 f861fh155(1)310(2) 1.8 fc 11.0 20.0 31.5 27.5 150 f861fc185(3)310(2) 1.8 fh 21.0 12.5 31.5 27.5 150 f861fh185(1)310(2) 2.2 fh 21.0 12.5 31.5 27.5 150 f861fh225(3)310(2) 2.2 fi 13.0 25.0 31.5 27.5 150 f861fi225(1)310(2) 2.5 fi 13.0 25.0 31.5 27.5 150 f861fi255(1)310(2) 2.5 fq 27.5 16.0 31.5 27.5 150 f861fq255(1)310(2) 2.7 fi 13.0 25.0 31.5 27.5 150 f861fi275(1)310(2) 2.7 fq 27.5 16.0 31.5 27.5 150 f861fq275(1)310(2) 3.3 fi 13.0 25.0 31.5 27.5 150 f861fi335(3)310(2) 3.3 fn 14.0 28.0 31.5 27.5 150 f861fn335(1)310(2) 3.3 fo 17.0 40.0 31.5 27.5 150 f861fo335(1)310(2) 3.3 fq 27.5 16.0 31.5 27.5 150 f861fq335(1)310(2) 3.9 fo 17.0 40.0 31.5 27.5 150 f861fo395(1)310(2) 3.9 fq 27.5 16.0 3 1.5 27.5 150 f861fq395(3)310(2) 3.9 fr 17.5 28.0 31.5 27.5 150 f861fr395(1)310(2) 3.9 ft 31.0 19.0 31.5 27.5 150 f861ft395(1)310(2) 4.7 fo 17.0 40.0 31.5 27.5 150 f861fo475(1)310(2) 4.7 fr 17.5 28.0 31.5 27.5 150 f861fr475(1)310(2) 4.7 ft 31.0 19.0 31.5 27.5 150 f861ft475(1)310(2) 4.7 rf 13.0 24.0 41.0 37.5 100 f861rf475(3)310(2) 4.7 rh 15.0 26.0 41.0 37.5 100 f861rh475(1)310(2) 4.7 rv 24.0 15.0 41.0 37.5 100 f861rv475(3)310(2) 4.7 rw 24.0 19.0 41.0 37.5 100 f861rw475(1)310(2) capacitance value (f) size code b (mm) h (mm) l (mm) lead spacing (p) dv/dt (v/s) part number table 1 C ratings & part number reference cont'd film capacitors ac line emi suppression and rc networks C f861 series metallized polypropylene film, class x2, 310 vac
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 001_f861_x2_310 ? 5/13/2015 10 manual soldering recommendations following is the recommendation for manual soldering with a soldering iron. the soldering iron tip temperature should be set at 350c (+10c maximum) with the soldering d uration not to exceed more than 3 seconds. recommended soldering temperature 0 50 100 150 200 250 300 350 400 0 1 2 3 4 5 6 7 8 soldering time (sec) soldering iron bit temperature (deg c) soldering process the implementation of the rohs directive has resulted in the selection of snagcu (sac) alloys or sncu alloys as primary solder. this has increased the liquidus temperature from that of 183oc for snpb eutectic alloy to 217 C 221oc for the new alloys. as a result, the heat stress to the components, even in wave soldering, has increased considerably due to higher pre-heat and wave temperatures. polypropylene capacitors are especially sensitive to heat (the melting point of polypropylene is 160 C 170oc). wave soldering can be destructive, especially for mechanically small polypropylene capacitors (with lead spacing of 5 mm to 15 mm), and great care has to be taken during soldering. the recommended solder profles from kemet should be used. please consult kemet with any questions. in general, the wave soldering curve f rom iec publication 61760-1 edition 2 serves as a solid guideline for successful soldering. please see figure 1. refow soldering is not recommended for through-hole flm capacitors. exposing capacitors to a soldering profle in excess of the above the r ecommended limits may result to degradation or permanent damage to the capacitors. do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. insert through- hole parts after the curing of surface mount parts. consult kemet to discuss the actual temperature profle in the oven, if through-hole c omponents must pass through the adhesive curing process. a maximum two soldering cycles is recommended. please allow time for the capacitor surface temperature to return to a normal temperature before the second soldering cycle. wave soldering recommendations 0 50 100 150 200 250 300 0 40 80 120 160 200 240 temperature ( c) time (s) ca 2 c/s ca 3.5 c/s typical ca 5 c/s cooling 2+3s max 115 c max t preheat t <150 c 100 c preheating typical first wave second wave 260 c film capacitors ac line emi suppression and rc networks C f861 series metallized polypropylene film, class x2, 310 vac
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 001_f861_x2_310 ? 5/13/2015 11 soldering process cont'd wave soldering recommendations cont'd 1. the table indicates the maximum set-up temperature of the soldering process figure 1 dielectric film material maximum preheat temperature maximum peak soldering temperature capacitor pitch 10 mm capacitor pitch = 15 mm capacitor pitch > 15 mm capacitor pitch 15 mm capacitor pitch > 15 mm polyester 130c 130c 130c 270c 270c polypropylene 100c 110c 130c 260c 270c paper 130c 130c 140c 270c 270c polyphenylene sulphide 150c 150c 160c 270c 270c 2. the maximum temperature measured inside the capacitor: s et the temperature so that inside the element the maximum temperature is below the limit: dielectric film material maximum temperature measured inside the element polyester 160c polypropylene 110c paper 160c polyphenylene sulphide 160c temperature monitored inside the capacitor. selective soldering recommendations selective dip soldering is a variation of refow soldering. in this method, the printed circuit board with through-hole components to be s oldered is preheated and transported over the solder bath as in normal fow soldering without touching the solder. when the board is o ver the bath, it is stopped and pre-designed solder pots are lifted from the bath with molten solder only at the places of the selected components, and pressed against the lower surface of the board to solder the components. the temperature profle for selective soldering is similar to the double wave fow soldering outlined in this document, however, instead of two baths, there is only one bath with a time from 3 to 10 seconds. in selective soldering, the risk of overheating is greater than in double wave fow soldering, and great care must be taken so that the parts are not overheated. film capacitors ac line emi suppression and rc networks C f861 series metallized polypropylene film, class x2, 310 vac
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 001_f861_x2_310 ? 5/13/2015 12 construction leads metal contact layer metal contact layer margin margin detailed cross section self-extinguishing resin molded plastic case molded plastic case single-sided metallized polypropylene film (second layer) single-sided metallized polypropylene film (first layer) margin single-sided metallized polypropylene film film winding scheme options 1 section single-sided metallized polypropylene film single-sided metallized polypropylene film single-sided metallized polypropylene film single-sided metallized polypropylene film 2 sections 3 sections 4 sections single-sided metallized polypropylene film polypropylene film dielectric 1 section double-sided metallized polyester film 3 sections double-sided metallized polyester carrier film polypropylene film dielectric double-sided metallized polyester carrier film 2 sections polypropylene film dielectric double-sided metallized polyester carrier film single-sided metallized polypropylene film 4 sections polypropylene film dielectric double-sided metallized polyester carrier film polypropylene film dielectric 1 section polypropylene film/foil 2 sections metal foil metal foil single-sided metallized polypropylene film polypropylene film dielectric metallized polyphenylene sulfide film with vacuum-evaporated aluminum electrodes 1 section metallized polyphenylene sulfide film (smr) metallized impregnated paper 1 section metallized impregnated paper single-sided metallized polyester film 1 section single-sided metallized polyester film polypropylene film dielectric 1 section axial - polypropylene film/foil 2 sections metal foil single-sided metallized polypropylene film polypropylene film dielectric metal foil single-sided metallized polypropylene film 2 sections polypropylene film dielectric double-sided metallized polyester carrier film single-sided metallized polypropylene film 1 section axial - single-sided metallized polypropylene film single-sided metallized polyester film 1 section axial - single-sided metallized polyester film axial - double-sided metallized polyester film winding scheme film capacitors ac line emi suppression and rc networks C f861 series metallized polypropylene film, class x2, 310 vac
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 001_f861_x2_310 ? 5/13/2015 13 marking kemet or kec iec climatic category approval marks top front capacitance capacitance tolerance series & safety class rated voltage passive flammability class manufacturing date code film capacitors ac line emi suppression and rc networks C f861 series metallized polypropylene film, class x2, 310 vac
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 001_f861_x2_310 ? 5/13/2015 14 packaging quantities size code lead spacing thickness (mm) height (mm) length (mm) bulk short leads bulk long leads standard reel ? 355 mm large reel ? 500 mm ammo pizza ke 7.5 2.5 6 10 2000 2500 2500 3500 kf 3 8 10 1500 1750 2100 2800 kg 4 8 10 2000 1500 1500 2100 kj 5 10.5 10 1500 1000 1200 1600 km 6 12 10.5 1000 800 1000 1350 kh 4 9 10 2000 1500 1500 2100 an 10 3.5 9 13 2000 2200 850 1700 1150 ag 4 9 13 2000 2200 750 1500 1000 ak 5 11 13 1300 2000 600 1250 800 ap 6 12 13 1000 1800 500 1000 680 ao 7 17 13 600 700 450 900 580 al 9.5 7.5 13 1000 1500 300 600 430 ae 4 8 13 2000 2200 750 1500 1000 bb 15 4 10 18 2500 1500 750 1500 1000 1411 bc 5 11 18 1000 1250 600 1250 800 1139 be 5.5 12.5 18 800 1000 550 1100 750 1020 bg 6 12 18 1750 1000 500 1000 680 935 bk 7.5 13.5 18 1000 800 350 800 500 748 bi 6 17.5 18 1000 800 500 1000 680 935 bp 8.5 14.5 18 1000 650 300 700 440 663 bt 9 12.5 18 1000 700 270 650 410 629 bo 7.5 18.5 18 900 500 350 800 500 748 bs 10 16 18 750 550 300 600 380 561 br 13 12 18 750 520 200 480 280 425 by 11 19 18 450 400 250 500 340 510 ba 8.5 12.5 18 1000 650 300 700 440 663 bz 12 20 18 350 300 220 450 330 459 db 22.5 6 14.5 26 805 450 300 700 464 660 di 7 16 26 700 450 250 550 380 564 dh 8.0 16.0 26 520 300 240 500 330 492 dj 8.5 17 26 450 350 250 450 280 468 dm 9 18.5 26 400 225 200 400 300 444 do 10 18.5 26 360 350 160 350 235 396 dp 11 20 26 300 200 190 350 217 360 du 13 22 26 230 150 150 300 200 300 dy 15.5 24.5 26 150 100 120 250 170 252 film capacitors ac line emi suppression and rc networks C f861 series metallized polypropylene film, class x2, 310 vac
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 001_f861_x2_310 ? 5/13/2015 15 packaging quantities cont'd size code lead spacing thickness (mm) height (mm) length (mm) bulk short leads bulk long leads standard reel ? 355 mm large reel ? 500 mm ammo pizza fb 9.0 17.0 31.5 370 fc 11.0 20.0 31.5 300 fi 13.0 25.0 31.5 250 fn 14.0 28.0 31.5 230 fo 17.0 40.0 31.5 190 fr 17.5 28.0 31.5 190 fs 19.0 29.0 31.5 170 fy 22.0 37.0 31.5 150 fh 21.0 12.5 31.5 150 fq 27.5 16.0 31.5 120 ft 31.0 19.0 31.5 100 rb 11.0 22.0 41.0 210 rf 13.0 24.0 41.0 175 rh 15.0 26.0 41.0 154 rc 16.0 28.5 41.0 140 rd 19.0 32.0 41.0 119 rp 21.0 38.0 41.0 105 ro 24.0 44.0 41.0 91 ru 30.0 45.0 41.0 77 rv 24.0 15.0 41.0 91 rw 24.0 19.0 41.0 91 film capacitors ac line emi suppression and rc networks C f861 series metallized polypropylene film, class x2, 310 vac
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 001_f861_x2_310 ? 5/13/2015 16 lead taping & packaging (iec 60286C2) taping specif cation dimensions in mm standard iec 60286C2 lead spacing +6/-0.1 f 5 7.5 10 15 22.5 27.5 f carrier tape width +1/-0.5 w 18 18 18 18 18 18 18 +1/-0.5 hold-down tape width minimum w 0 6 6 9 10 10 10 position of sprocket hole +/-0.5 w 1 9 9 9 9 9 9 9 +0.75/-0.5 distance between tapes maximum w 2 3 3 3 3 3 3 3 sprocket hole diameter +/-0.2 d 0 4 4 4 4 4 4 4 feed hole lead spacing +/-0.2 (1) p 0 (3) 12.7 12.7 12.7 12.7 12.7 12.7 12.7 distance lead C feed hole +/-0.7 p 1 3.85 3.75 7.7 5.2 7.8 5.3 p 1 deviation tape C plane maximum ?p 1.3 1.3 1.3 1.3 1.3 1.3 1.3 lateral deviation +/-2 ?h 2 2 2 2 2 2 2 total thickness +/-0.2 t 0.7 0.7 0.7 0.7 0.9 max 0.9 max 0.9 max sprocket hole/cap body +/-0.5 h 0 (2) 18.5 +/-0.5 18.5 +/-0.5 18.5 +/-0.5 18.5 +/-0.5 18.5 +/-0.5 18.5 +/-0.5 18+ 2/-0 (1) maximum cumulative feed hole error, 1 mm per 20 parts. (2) 16.5 mm available on request. (3) 15 mm available on request (f 10 mm). film capacitors ac line emi suppression and rc networks C f861 series metallized polypropylene film, class x2, 310 vac lead spacing 5 mm lead spacing 7.5 mm lead spacing 10 ? 15 mm lead spacing 22.5 ? 27.5 mm 0 0 0 0
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 001_f861_x2_310 ? 5/13/2015 17 lead taping & packaging (iec 60286C2) cont'd ammo specif cations series dimensions (mm) h w 7 r4x, r4x+r, r7x, rsb 360 340 59 f5a, f5b, f5d f6xx, f8xx phexxx, pmexxx, pmrxxx 330 330 50 reel specif cations series dimensions (mm) d h w r4x, r4x+r, r7x, rsb 355 500 30 25 55 (max) f5a, f5b, f5d f6xx, f8xx phexxx, pmexxx, pmrxxx 360 500 30 46 (max) manufacturing date code (iecC60062) y = year, z = month year code month code 2000 m january 1 2001 n february 2 2002 p march 3 2003 r april 4 2004 s may 5 2005 t june 6 2006 u july 7 2007 v august 8 2008 w september 9 2009 x october o 2010 a november n 2011 b december d 2012 c 2013 d 2014 e 2015 f 2016 h 2017 j 2018 k 2019 l 2020 m film capacitors ac line emi suppression and rc networks C f861 series metallized polypropylene film, class x2, 310 vac h t w d w h
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 001_f861_x2_310 ? 5/13/2015 18 kemet corporation world headquarters 2835 kemet way simpsonville, sc 29681 mailing address: p.o. box 5928 greenville, sc 29606 www.kemet.com tel: 864-963-6300 fax: 864-963-6521 corporate off ces fort lauderdale, fl tel: 954-766-2800 north america southeast lake mary, fl tel: 407-855-8886 northeast wilmington, ma tel: 978-658-1663 central novi, mi tel: 248-306-9353 west milpitas, ca tel: 408-433-9950 mexico guadalajara, jalisco tel: 52-33-3123-2141 europe southern europe sasso marconi, italy tel: 39-051-939111 skopje, macedonia tel: 389-2-55-14-623 central europe landsberg, germany tel: 49-8191-3350800 kamen, germany tel: 49-2307-438110 northern europe harlow, united kingdom tel: 44-1279-460122 espoo, finland tel: 358-9-5406-5000 asia northeast asia hong kong tel: 852-2305-1168 shenzhen, china tel: 86-755-2518-1306 beijing, china tel: 86-10-5877-1075 shanghai, china tel: 86-21-6447-0707 seoul, south korea tel: 82-2-6294-0550 taipei, taiwan tel: 886-2-27528585 southeast asia singapore tel: 65-6701-8033 penang, malaysia tel: 60-4-6430200 bangalore, india tel: 91-806-53-76817 note: kemet reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. kemet does not assume any responsibility for infringement that might result from the use of kemet capacitors in potential circuit designs. kemet is a registered trademark of kemet electronics corporation. film capacitors ac line emi suppression and rc networks C f861 series metallized polypropylene film, class x2, 310 vac
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com f3 001_f861_x2_310 ? 5/13/2015 19 disclaimer all product specif cations, statements, information and data (collectively, the information) in this datasheet are subject to change. the customer is responsible for checking and verifying the extent to which the information contained in this publication is applicable to an order at the time the order is placed. all information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. statements of suitability for certain applications are based on kemet electronics corporations (kemet) knowledge of typical operating conditions for such applications, but are not intended to constitute C and kemet specif cally disclaims C any warranty concerning suitability for a specif c customer application or use. the information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. any technical advice inferred from this information or otherwise provided by kemet with reference to the use of kemets products is given gratis, and kemet assumes no obligation or liability for the advice given or results obtained. although kemet designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. although all productCrelated warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. film capacitors ac line emi suppression and rc networks C f861 series metallized polypropylene film, class x2, 310 vac

▲Up To Search▲

Price & Availability of F861AK823M310C

	To Download F861AK823M310C Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .